 |
Technical Papers Authored and Co-authoredby Flow Systems PersonnelArnberg,
B.T., Britton, C.L., Two Primary Methods of Proving Gas Flow,
Paper 3-8-216, Symposium on Flow, Pittsburgh, Pa., 1971. Arnberg,
B.T., Britton, C.L., and Seidl, W.F.,
Discharge Coefficient
Correlations for Circular Arc Venturi Flowmeters at
Critical (Sonic) Flow, Paper 73-WA/FM-8,
American Society of Mechanical Engineers, New York, NY.
1973. Britton,
C.L., Sonic
Nozzles, Appalachian Gas Measurement Short Course, Morgantown, WV, 1975. Britton,
C.L., Sonic
Nozzles for Gas Meter Calibration,
International School of Hydrocarbon Measurement, Norman,
OK, 1976. Britton,
C.L., Sonic
Nozzles for Gas Meter Calibration,
Appalachian Gas Measurement Short Course, Pittsburgh, PA,
1976. Britton,
C.L., Calibration
Data for a New-Shaped Annular Averaging Head Device,
International School of Hydrocarbon Measurement, Norman,
OK, 1978. Britton,
C.L., Rahmeyer, W., Development of an Averaging Type Pitot-Probe
for Discharge Measurements, ISA
International Instrumentation Symposium, Indianapolis, IN,
1981. Britton,
C.L., Performance
of an Averaging Type Pitot Probe in Ideal and Non-Ideal
Piping Configurations, ChemAsia, Singapore,
1982. Britton,
C.L., Caldwell, S., Seidl, W.F., Snowden, T., Research
Program to Develop an Archival Database of Low Reynolds
Number Discharge Coefficients and Related Parameters for
Sharp-Edge Flange-Tapped Orifice Meters,
Report prepared for American Petroleum Institute, 1984. Britton,
C.L., Stark, S.T., New Data for the Quadrant-Edge Orifice,
First International Symposium on Fluid Flow Measurements.
Washington, D.C., 1986. Britton,
C.L., Jones, D.R., Field Transfer Prover, Second
International Symposium on Fluid Flow Measurement,
Calgary, Alberta, Canada, June 1990. Britton,
C.L., Energy
Measurement of Natural Gas Utilizing a Quadrupole Mass
Spectrometer, Second International
Symposium on Fluid Flow Measurement, Calgary, Alberta,
Canada, June 1990 Britton,
C.L., Caron, R.W., A Measurement Assurance Program (MAP) Using
Sonic Nozzles, Third International Flow
Symposium on Fluid Flow Measurements, San Antonio, TX,
1995. Carter,
M.S., Caron, R.W., Temperature Profile Within Sonic Nozzles,
Third International Flow Symposium on Fluid Flow
Measurements, San Antonio, TX, 1995. Britton.
C.L., Caron, R.W., Discharge Coefficients for Critical Flow
Venturis, FED-Vol. 239, ASME Fluids
Engineering Division Conference, Vol. 4, pp. 415-420, San
Diego, CA, 1996. Britton,
C.L., Caron, R.W., A Measurement Assurance Program (MAP) Using
Sonic Nozzles, Measurement Science
Conference, Anaheim, CA, 1996. Britton.
C.L., Caron, R.W., Unchoking Pressure Ratio for Critical Flow
Venturis, Paper FEDSM97-3004, ASME Fluids
Engineering Division Summer Meeting, Vancouver, BC,
Canada, 1997 Britton.
C.L., Caron, R.W., The Critical Flow Function, C*, for Humid Air,
Paper FEDSM98-5309, ASME Fluids Engineering Division
Summer Meeting, Washington, DC, 1998. Britton,
C.L., Caron, R.W., Kegel, T.M., A
Measurement Assurance Program (MAP) Using Sonic Nozzles,
Fourth International Flow Symposium on Fluid Flow
Measurements, Denver, CO, 1999. Britton,
C.L., Caron, R.W., Kegel, T.M., Measurement
Uncertainty Considerations When Using An Array Of Critical
Flow Venturis, Measurement Science
Conference, Anaheim, CA, 1999. Britton,
C.L., Caron, R.W., Kegel, T.M., Investigation
Into The Accuracy Of Multiple Critical Flow Venturis
Mounted In Parallel Within A Common Plenum,
Fourth International Flow Symposium on Fluid Flow
Measurements, Denver, CO, 1999.
|