|
Flowmeter Design Request
|
Please fill out this form completely so that we may provide
an accurate solution for your custom application.
If you require assistance, contact us via email
at info@flowsystemsinc.com, or by telephone
at 800-466-FLOW (3569) (domestic) or (970) 532-0617 (international).
|
Flow Measure:
|
|
Sample Response:
|
|
|
|
|
|
* Fluid:
|
|
Air, Argon, Helium, Hydrogen, Methane,
Natural Gas, Nitrogen, Oxygen, H2O
|
|
* State:
|
|
Gas, Liquid, Steam
|
|
* Flow Measure:
|
|
Mass or Volume Flow
|
|
*
Minimum Flow:
|
|
10 lbm/sec, scfm or lpm (please include
number & units)
|
|
*
Normal Flow:
|
|
50 lbm/sec, scfm or lpm (please include
number & units)
|
|
*
Maximum Flow:
|
|
70 lbm/sec, scfm or lpm (please include
number & units)
|
|
|
|
|
|
Meter Inlet Pressure:
|
|
Sample Response:
|
|
|
|
|
|
*
Pressure at Minimum Flow
|
|
5 psig or kpa (please include number
& units)
|
|
*
Pressure at Normal Flow
|
|
10 psig or kpa (please include number
& units)
|
|
*
Pressure at Maximum Flow
|
|
15 psig or kpa (please include number
& units)
|
|
*
Absolute:
|
|
|
|
|
|
|
|
Meter Inlet Temperature:
|
|
Sample Response:
|
|
|
|
|
|
Temperature at Minimum Flow
|
|
10 F, C, Rankine, or Kelvin (please
include number & units)
|
|
Temperature at Normal Flow
|
|
50 F, C, Rankine, or Kelvin (please
include number & units)
|
|
Temperature at Maximum Flow
|
|
100 F, C, Rankine, or Kelvin (please
include number & units)
|
|
|
|
|
|
Meter Type:
|
|
Sample Response:
|
|
|
|
|
|
Meter Type:
|
|
|
If the meter type
is not a Sonic Nozzle, do you want us to size using particular Differential Pressure
Value?
|
User Specified Dp:
|
|
|
|
Dp Value
|
|
250 inches of H2O, inches of Hg, psid,
mmHg
|
|
Corresponding Flow Condition:
|
|
|
If the meter type
is a Venturi, how important is pressure recovery?
Form Recovery:
|
Other:
|
|
Sample Response:
|
|
|
|
|
|
*
Desired Uncertainty:
|
|
+/- 0.50%, +/- 0.25%, +/- 0.10%, other (specify)
|
|
*
Of Rate or Full Scale:
|
|
Rate, Full Scale
|
|
Pipe or Tubing:
|
|
|
|
Line Size:
|
|
2", 4", 6", 8", 10", 12", 16",
18", other (specify)
|
|
If Pipe; Schedule:
|
|
10S, STD, 40S, XS, CS, other (specify)
|
|
If Tube; Wall Thk.
|
|
0.065"
|
|
Meter Material:
|
|
Stainless Steel, Carbon Steel, Aluminum other (specify)
|
|
Piping Material:
|
|
Stainless Steel, Carbon Steel, Aluminum other (specify)
|
|
End Connections:
|
|
150# RF Flanges, MNPT, AN Flare, Male
AN, Swagelok, Pipe Coupling, Butt Weld, other (specify)
|
|
Pressure Taps:
|
|
1/4" FNPT, 1/2" FNPT, 1/4" Male
AN, 1/4" Swagelok, 1/4" Tube, other (specify)
|
|
Piezometer Rings:
|
|
Yes, No
|
|
Temperature Tap:
|
|
1/4" FNPT, 1/2" FNPT, 3/4" FNPT, 1/8"
Swagelok, 1/4" Swagelok, other (specify)
|
|
Meter Tube:
|
|
Includes a Flow Conditioner,
Inlet Section with taps & Exit Section.
|
|
Flow Calibration:
|
|
|
|
Calibration Accuracy:
|
|
|
|
Transmitter or Flow Computer:
|
|
|
Other Application Notes:
For additional information on Rosemount 3095MV
Transmitters, click here:
www.rosemount.com/products/flow/m3095mv.html
For additional information on FLOW
SYSTEMS' Flow Computers, click here:
http://www.flowsystemsinc.com/fc175.htm
http://www.flowsystemsinc.com/fc500.htm
|
|